Ericsson R250d PRO, Руководство пользователя

Страница: 29 / 65

Using Menus 25
This chapter explains how to use your terminal’s menus.
You should read this chapter thoroughly to understand
how to navigate through the menu system and how to
change menu settings.
Your terminal’s menus are an easy way for you to:
• Store and recall numbers in memory
• Check text messages and voice mail
• Set up call features
• Change ring tone and other sound settings
• Change other settings for your terminal
Opening Menus
To open the main menu, press
Ö
.
Main Menus
and the
names of the first two menus are shown in the display.
Pressing
NO
when the main menu is shown in the display
returns your terminal to standby mode.
To open one of the submenus:
1 Press
Ö
or
Ó
to scroll through the list of submenus.
2 When the menu pointer ( ) is beside the submenu
you want to open, press
YES
. The list of settings for
the submenu is shown in the display.
3 You can scroll through the list of settings by pressing
Ö
or
Ó
.
4 To back up to the list of submenus, press
NO
. Press-
ing
NO
from a list of submenu settings returns you
to the main menu list.
Changing Settings
Open the menus as previously described, then:
1 Press
Ö
or
Ó
to scroll through the list until the
menu pointer is beside the setting you want to
change.
2 Press
YES
. The choices available for the setting are
shown in the display. The current active choice is
enclosed in brackets. Some settings have two
choices, such as On and Off for the Speed Dial set-
ting in the
&$//6(783
Menu. Other settings
have a list of choices, such as the Ring Pulse setting
in the
6281'6
Menu.
3 Press
YES
to store the choice you selected or press
NO
if you want to exit the menus without storing
any changes you have made. If you store your
Using Menus