Ericsson MX8400, Справочное руководство

Страница: 180 / 226

Conditional Access
D.8.4 Creating a Clear Stream
The final step is to use nCC Profile Manager [nCC V 6.1] to set up the Multiplexer to
produce a cloned transport stream in the clear.
Secondary Outputs are used to tell nCompass to route a transport stream to a
number of other, optional outputs. This is often required to have the same content
distributed to QAM modulators for the cable service in addition to IP switches for a
simultaneous Broadband service.
It can also be used to add a clear version of a scrambled TS for monitoring
purposes on the MX8400 multiplexer. This will be an identical set of services in the
clear, but all ECM, EMM references and scrambling flags will be removed.
Note: This will use up an additional MX8400 TS license.
Table D.12 Simultaneous Scrambled and Clear Outputs
Step Action Result Comments
1 Select a Network in the Profile
View window and either:
click the right mouse button to
select
Add Transport Stream
from the drop-down menu or
click the Add
Transport
Stream command icon.
The Transport Stream
dialog box opens.
There are a number of tabs
2 Select the Secondary Outputs
tab
The Secondary Outputs
dialog box is displayed See Figure D.19
3 Select Add/Remove to display
a list of Available, Selected,
and Clear
4 Select the required outputs and
click
>> or << to move TS
between the lists
2/1553-FGC 101 1014 Uen B D-30