Ericsson MX8400, Справочное руководство

Страница: 178 / 226

Conditional Access
D.8 Simultaneous Scrambled and Clear Outputs
D.8.1 Overview
This configuration produces a cloned output in addition to the main scrambled
output. This could be for local monitoring purposes.
The process has three steps:
1. Add an output device to the Physical Map
2. Connect the Multiplexer to the Output device.
3. Configure the Multiplexer to produce the Clear stream
Figure D.18 Clone a TS in the Clear
MX8400 Multiplexer
Scrambling
Engine
SCRAMBLED
CLEAR
Output
Transport
Stream
D.8.2 Setting up the Output
An output is a data stream leaving the system. Each output needs to be defined and
labeled. An output can be added in Equipment Set up that can be used as the
secondary output.
Table D.10 Setting Up a Generic Output
Step Action Result Comments
1 In nCompass Control,
Equipment Set up , load
the required Physical
Map offline
Displays a map
view in which to
make changes. Use File , Open to display an offline version of
the map.
2
From the list of devices,
select the required
Generic Outpu t icon and
drag and drop it onto the
map.
Right-click the copied icon
to display a contextually-
sensitive menu.
Displays the
Create Generic
Output
dialog box
This option allows any cable type to be used
Label: Enter the name that you want to call the
Generic output. 3 In the Create Generic
Output dialog box, enter
the required details
Output Type: select either Cable, Satellite or Terrestrial.
2/1553-FGC 101 1014 Uen B D-28