8
be charged 14 to 16 hours on the first charge cycle and
then in accordance with the charger model instructions
thereafter.
To remove the battery pack, push up on the battery
latch and slide the battery pack to the right. To replace
the battery, align the battery on the track and slide to the
left until a click is heard, indicating the battery is correctly
installed.
If the battery is to be charged on the radio, ensure
that the power switch on the radio is in the off position
before charging. Failing to turn the power switch to off
during the charge cycle will result in a less than full
charge condition, which will noticeably reduce the
operating time between charges!
Normal battery operation time is 8 hours. This may
vary depending upon how much the receiver audio is
present and how much you transmit. The actual time
may vary from day to day depending upon operational
requirements.
FOR BEST PERFORMANCE
1.
Charge battery to full capacity, 14 hours at the
standard C/10 rate (capacity X .10). For "rapid"
chargers, allow additional time (2-3 hours) for
"topping off" the charge after it switches from "fast"
to "slow".
2.
Use the battery soon and use as much of the battery
capacity as possible or practical. A battery that is
charged and discharged completely will maintain the
Содержание LZT-1872R1A
