Ericsson iPECS LIP-8002AE, Руководство пользователя

Страница: 11 / 287

LIP-8002E/2AE User Guide
5
2.
Receiving Calls
2.1 Answering a Call While Idle
There are 3 basic types of incoming calls;
internal/external calls,
Intercom Voice Announce calls,
and Hold recalls.
Your phone may be assigned Ringing Line
Preference ; in this case, calls that ring are answered
by lifting the handset. Otherwise, you must press the
flashing Flex button.
External calls are from CO lines or VoIP channels that
are programmed to ring at your phone. For external
calls,
Delay Ring may be assigned allowing others to
answer the call before the call rings at your phone.
Calls can be forwarded in some manner from another
user; if providing call coverage for other users, you may
also receive
Station Call Coverage calls.
Calls placed on Hold , including Transfers, parked calls,
etc., will Recall if left on hold for too long.
ICM Voice Announce calls are answered based on the
ICM Signaling mode at the receiving phone; in Hands-
Free (HF) mode, after the splash tone and
announcement, speak normally into the microphone. In
the Privacy (PV) mode, lift the handset to respond. The
ICM Signaling mode can be assigned in Station
Programming .
In iPECS-LIK, iPECS SBG-1000, iPECS-MG
To answer a call ringing at your phone:
•
Lift the handset, the call will be connected.
To respond to an Intercom Voice Announce call:
•
Lift the handset to respond.
2.2 Responding to a Call While Busy
While you are busy on another call, you may receive a
Muted Ring, Camp-On tones, or Voice-Over
announcements. Muted Ring is provided over the
speaker of your Phone indicating a
Call Waiting . You
also may receive Camp On tones, a burst of tone on top
2. Receiving
Calls