Ericsson iPECS-100 Скачать руководство пользователя страница 49

Страница: 49 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

2 ACD Group Supervisor (PGM 191-Btn 18)

3 ACD Warning Tone (PGM 191-Btn 12)

Related Features



Automatic Call Distribution



Agent Help Request

Hardware



iPECS Phone

2.5.11.3 Agent Call Monitor

Description

Agent Call Monitor permits an active Supervisor to monitor an Agent

’s call in progress for

training purposes or to assist the Agent. When used, the Supervisor is connected to the call
with the microphone muted, the

[MUTE]

button LED is On. If ACD Warning Tone is enabled, a

Warning Tone is provided to the Agent

’s call indicating the Supervisor has entered the call. The

Supervisor hears the Agent and connected party and may join the conversation by pressing the

[MUTE]

button to activate the microphone.

The Supervisor station must be assigned an

{AGENT MONITOR}

button to activate the Agent

Call Monitor feature.

Operation

Supervisor iPECS Phone

To assign an

{AGENT MONITOR}

button

[PGM]

{FLEX}

“577” + “Group Number” +

[SAVE]

To enter an active Agent call from the Supervisor phone

1. Lift the handset or press the

[SPEAKER]

button.

2. Call the desired Agent and receive busy tone,

3. Press the

{AGENT MONITOR}

button, the Supervisor is connected to the active

Agent call with the microphone muted, the

[MUTE]

button LED is On.

To converse with the Agent and connected party

1. Press the illuminated

[MUTE]

button.

Conditions

1. The Supervisor must be active and logged into the Agent

’s ACD group to monitor

calls in progress.

Programming

NUMBERING PLAN

1 Supervisor Monitor Code (PGM 107-Btn 8)

STATION GROUPS

1 ACD Groups (PGM 191)

2 ACD Group Supervisor (PGM 191-Btn 18)

Содержание iPECS-100

















































































































































































































































































































































































































































































Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды

Ericsson iPECS-100, Описание функций и руководство по эксплуатации

Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды