Ericsson iPECS-100 Скачать руководство пользователя страница 48

Страница: 48 / 464

iPECS-LIK

Feature Description & Operation Manual

Issue 6.1

Hardware



iPECS Phone

2.5.11.2 Supervisor Help Response

Description

An Agent may request assistance from a Supervisor using the ACD Group Help Code, default
574 or

{HELP}

button. The Supervisor is then notified of the Help request in the iPECS Phone

display and a flashing

{HELP RESPONSE}

button. The Supervisor can respond using the Help

Response button, which is required, and be connected to the Agent

’s active call with the

microphone muted. The Supervisor hears the Agent and connected party and may join the
conversation by pressing the

[MUTE]

button to activate the microphone.

Operation

Agent iPECS Phone

To request Supervisor assistance,

1. Press the

{HELP}

button.

SLT

1. Hook-flash and dial

“574”, the Agent Help code

2. Dial the desired ACD Group number.

Supervisor iPECS Phone

To assign a

{HELP RESPONSE}

button

[PGM]

{FLEX}

“574” + “Group Number” +

[SAVE]

To respond to a Help request, at the Supervisor Phone,

1. Lift the handset or press the

[SPEAKER]

button,

2. Press the flashing

{HELP RESPONSE}

button, the Supervisor is connected to the

active Agent call with the microphone muted, the

[MUTE]

button LED is On.

To converse with the Agent and connected party

1. Press the illuminated

[MUTE]

button.

Conditions

1. The Agent Help request is sent to the lowest numbered available Supervisor station

for the associated ACD Group.

2. If no Supervisor is available, the Agent receives error tone.

3. A Warning Tone, if enabled, will be sent to the Agent as the Supervisor is connected

to the conversation.

4. Only one active Help request is allowed at a time, a second help request will cancel

any active help request.

Programming

NUMBERING PLAN

1 ACD Group Help Code (PGM 107-Btn 5)

STATION GROUPS

1 ACD Groups (PGM 191)

Содержание iPECS-100

















































































































































































































































































































































































































































































Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды

Ericsson iPECS-100, Описание функций и руководство по эксплуатации

Результаты поиска

Содержание iPECS-100

Отзывы:

Похожие инструкции для iPECS-100

Бренды по названию

Популярные бренды