Ericsson EXN401, Руководство пользователя, Страница: 118 / 180

Bridging
3.4.2.3.3 show (general)
Description From any mode, user can display the list of priority tables or
the current configuration of a specific table.
Syntax
show prio-table [name]
name
Specifies the name of the priority table.
Default None
Modes All
Example To display configuration of priority table named prioatm:
EXN400(...)# show prio-table prioatm
3.4.2.4 Removing a Priority Table
From the Global Configuration mode, enter the following command:
no prio-table table_name
table_name
The name of the priority table to remove.
A priority table that is still in use or the priority table default cannot be
removed.
3.4.3 ATM PVC Group Configuration Mode
3.4.3.1 Overview
PVC groups are used in VLAN priority mapping to divide the data flow
based on the priority bits of the frame. Each PVC in the group is assigned a
priority level.
The PVCs in the group must be defined first. Any PVC included in the
group cannot be removed as long as it belongs to the group. A PVC
included in a group does not appear in the list of individual PVCs displayed
by the
show
command in the ATM Interface Configuration mode but in the
list of PVC groups.
PVCs in the group can have different QoS parameters.
The group of PVCs bound to the bridge forms a single virtual port.
A priority level may not be assigned a PVC. In this case, frames received
with this priority level will be dropped.
104
1553-LZY 214 2655 C 2004-11-24