Exiting Data Calls
Under normal conditions, the radio enters the scan lockout mode and returns
to the control channel after completion of a data call (transmit or receive). If,
during a data call, one of the following conditions occurs, the data call is im-
mediately terminated and the radio performs the desired function:
•
PTT activated.
•
PTT in Public Address mode.
•
Emergency declared by pressing the pre-programmed emergency
button.
•
A group or system change.
Scan Lockout Mode
Following the transmission or reception of a data call, if scan is enabled,
scanning will stop temporarily (duration pre-programmed). During this time
the scan LED will flash to indicate that scan is enabled but temporarily sus-
pended. This mode is normally exited when the pre-programmed time ex-
pires; however, the following actions will terminate the scan lockout mode
before the timeout is completed.
•
The
c
(System Model) or
(Scan Model) button is pressed.
•
PTT is pressed.
•
A group or system change.
•
Entering phone call mode
•
Entering individual call mode.
•
A new emergency assignment has been received.
•
PTT pressed in Public Address Mode.
•
An emergency declared or cleared.
•
Microphone removed from hookswitch (off-hook).
•
Receiving an individual or phone call.
•
Receiving Agency, Fleet or System All Call.
•
Pressing the
k
button to turn scan on or off.
49