Ericsson EDACS ORION Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 84

Ericsson EDACS ORION Скачать руководство пользователя страница 14

ALM

Toggles the external alarm On/Off. The external alarm is
used to indicate the radio is receiving an Individual Call.
Press the key once to enable external alarm and press again
to disable external alarm.

SG1-SG5

Corresponds to five (5) pre-programmed System/Groups.
Pressing a key programmed for SG1 would switch the radio
to the pre-programmed System/Group 1. Pressing a key
programmed for SG2 would switch the radio to the pre-pro-
grammed System/Group 2, etc.

WAIL, YLP,
RST, SL1-
SL8

The WAIL and YLP (Yelp) keys are designed to control an
optional Siren package. The SL1-SL8 (Siren/Light) keys
are designed to control an optional Siren/Light package.
The RST (Reset) key is used to turn all sirens and lights off.

SPK

This key function is used to toggle the external speaker
On/Off.

STO-ST9

The status 0-9 keys are used to send pre-programmed status
message to the EDACS site.

PVT

Enables or disables Private Mode for the System/Group dis-
played. See the PRIVATE OPERATION section.

KEY

Displays the Encrypted Keys. This selects the DISP KEY
operation from the menu functions.

GE*

This key function is used in Conventional Mode to send
GE

•

STAR emergency signalling.

PA

This key function enables and disables the Public Address
feature.

#

DTMF keypad function.

1-9

Keypad numbers.

*

DTMF Keypad function.

Primary Functions (Quick Access)

The secondary function of the

k

button is to toggle the keypad buttons be-

tween their primary function and their secondary function. When the secon-
dary keypad is active, i.e. entering phone digits for an interconnect call, the

k

button can be used to toggle the keypad buttons back to their primary

function, perform a task (siren/light enable), and then toggle back to finish
entering the digits for the phone number.

PRIMARY

is displayed when the

k

button is used to toggle the keypad keys back to their primary functions.

This provides quick access to the primary functions of the keypad. This is a

14

«
...
12
13
14
15
16
...
»

Содержание EDACS ORION





















































































Отзывы:

Нет отзывов