Ericsson EDACS IPE-200, Руководство пользователя, Страница: 33 / 56

If you called a wrong number, you can press
E
before
the call has been connected.
ERASING A STORED NUMBER
A stored number (and name) will be erased automat-
ically if you store a new number in the same location.
However, you can erase a number without replacing with
a new number, by proceeding as follows:
1. Press
C
key and hold for approximately 1 sec-
ond to erase any entered digits.
2. Press
M
. Press
>
to scroll to RECALL--.
3. Enter the desired location, for example 22. Press
M
. The warning message "USED" flashes for 5
seconds.
4. Press
M
again. The message "CLEARED 22" is
displayed for 5 seconds, and the number (and
name) stored in location 22 are now erased.
RECALLING A NUMBER DURING A CALL
You may recall a memory location during a call. The
number in that location may then be sent using DTMF
(Dual Tone Multi-Frequency) tones. See the chapter on
DTMF Signaling for further information.
9 S
33