SITE REQUIREMENTS AND INSTALLATION INSTRUCTIONS
11 (28)
BRU1 MANUAL, Doc.no: b1sitreq Uen Rev PA5, 2004-02-19
5
Installation of the BRU1
5.1
Installation of the BRU1 on a Wall
1.
Unpack the BRU1 equipment. Tick off all parts against the delivery note.
Please report missing or damaged parts to the shipper.
2.
Mark the positions of three holes using the base plate. Drill the three holes
in the wall with an appropriate dimension, see
Figure 3
BRU1 base plate.
83/1424-LZE 401 204 Re
v A
