Ericsson AEGIS EDACS M-PA Narrowband 9600, Руководство оператора, Страница: 24 / 44

The radio may also be programmed for prior-
ity wide area system scan. A priority system may
be assigned to each system programmed into the
radio. Radios programmed in this manner will
scan the priority trunked system’s control channel
once every one, two, three or four minutes (pro-
grammable). This priority scan timer is reset each
time the PTT BUTTON is pressed.
Scanning Trunked Groups
Groups which have been previously added to
the scan list on a per system basis may be
scanned. Each system’s scan list is retained in
memory when the radio is turned off or when the
battery pack is removed.
The radio will not scan when the emergency
mode is enabled (EMG status flag is on).
The following procedures outline scan opera-
tions for trunked groups. See the conventional
mode operating procedures for specific proce-
dures on conventional channel scanning.
Adding Groups To And Deleting Groups
From The Scan List
1. Scan must be off to add groups to and
delete groups from the scan list. The
SCN status flag will be on if scan is on.
If necessary, toggle scan operation off by
pressing
s
.
2. Select the desired group to be added to
or deleted from the scan list. The S
status flag will be on if the group is
presently on the scan list.
3. Toggle the S status flag on or off, as
desired, by pressing
@
and then A/D
(shifted
s
). When the S status flag is
on, the group is on the scan list. When
the S status flag is off, the group has
been deleted from the list and will not be
scanned.
Using Scan
1. Toggle scan operation on by pressing
s
. The SCN status flag will turn on
when the radio is scanning.
24