Ericom PowerTerm LTC, Руководство пользователя

Страница: 89 / 93

PowerTerm LTC
89
Users Guide
program reference an alternative sequence, thus replacing it with a more effective
sequence.
NOTE The source.prt and customized prt files be located in the same folder as
the PowerTerm product executable.
1. Edit the source.prt file in the following manner: blank = X1B
escapesequence (which the emulation should ignore)
2. Save the file.
3. Create the file ignore.prt with the following line: blank =
4. Save the file ignore.prt to the PowerTerm folder.
5. Create a PSL file with the following line: open-printer file ignore.prt
6. Save the PSL file to the PowerTerm folder.
7. Edit the PowerTerm InterConnect shortcut by adding the newly created PSL
file name after the exe (preceded by a space).
8. Double-click the shortcut icon.
9.2.2. Modifying Printer Settings via the .PED file
The .ped files are very useful when you want to modify a particular print setting:
page orientation, LPI (Lines Per Inch) or CPI (Characters Per Inch).
The .ped files are located in /opt/PowerTerm/InterConnect/printers
You must insure that the Printer Properties Page parameters are set correctly
before applying the .ped settings:
To Print Screen:
1. Select Terminal | Setup. The Terminal Setup dialog is displayed.
2. Select the Printer tab. The Printer properties page is displayed.
3. Set Print Screen Data Conversion to "None".
To use Slave Printing:
1. Select Terminal | Setup. The Terminal Setup dialog is displayed.
2. Select the Printer tab. The Printer properties page is displayed.
3. Set Slave Printer Data Conversion to "None".
NOTE If the value "Graphic" is left in the above fields then OS Print manager
takes control and decides how to print the job.
To change the default:
1. Open up the desired PED file in a text editor such as Notepad.
2. Locate the section entitled "[Printer Escapes]".
3. Add a line starting with "init = ".