Item no: 07508
1/6
Motorcycle Carrier
To avoid personal injury and/or property damage, please read and follow
ALL instructions before assembling and operating.
1. Never overload ramp or carrier. Maximum capacity for this motorcycle carrier is 500 lb /or hitch
capacity, whichever is less. Please refer to your hitch manufacturer’s maximum load capacity.
2. Carefully roll vehicle up or down the ramp. Never drive or ride your equipment while loading or
unloading. Erickson Manufacturing is not responsible for any damage or injuries that can
occur when loading and un-loading. USE AT YOUR OWN RISK!
3. Always load or unload on a solid, level and stable surface with the vehicle in gear, the parking/
emergency brake on, and engine off.
4. Use to haul a motorcycle or scooter only.
5. Ramp surface must be clean, dry and free from oil, grease or water.
6. Inspect ramp and carrier before each use. Tighten any loose hardware. Replace any worn/damaged
parts. Do not attempt to use if the ramp or carrier is damaged in any way. No modification, alteration,
or deviation to the motorcycle carrier are authorized by the manufacturer. Proper care and
maintenance of the unit are essential to safety.
7. Proper use of this product is critical to safety, and beyond the control of Erickson Manufacturing
Ltd. Erickson Manufacturing Ltd. neither guarantees nor is liable for any damage resulting from
improper use. The liability of this product is limited to its purchase price if it proves to be defective
in material and/or workmanship.
NEVER RIDE ON YOUR EQUIPMENT WHEN LOADING OR UNLOADING
MAY CAUSE INJURY OR DEATH
WARNING
Specifications
Rated Capacity
500 lb.
44” x 76” x 7”
Dimensions
