3
Item no: 07496
ASSEMBLY FOR CARGO CARRIER
It is important that you read the entire manual to become familiar with the product BEFORE you
assemble and use the Cargo Carrier. Before assembling and operating the Cargo Carrier, be sure
that you have all parts described in the Parts List and Assembly Diagram located on the last pages
of this manual.
FIG. 1
STEP 1
Connect the two supporting frames (1) using the connecting piece (2); line up the corresponding
square holes; use 2 of the M10*20 carriage bolts (3) and install in top 2 holes only; Secure with 2 of the
M10 locknuts (4). Continue the same configuration for the other side. Do not tighten completely. Details
shown in Fig 1.
FIG. 2
STEP 2
Place the tie plate (7) on the middle of the assembled supporting frame (1), then place the frame
(1) over the square tube (6) and the two support braces (5) under the frame; connect using the two bolts
M10X83 (8) and two lock nuts (4). Install 4 remaining M10*20 (3) carriage bolts into connecting pieces and
secure with M10 Locknuts (4). Do not tighten completely. See Fig 2.
