Item No. 07464
English
/French/Spanish
Page 1 of 4
80” x 11” STEEL MESH LOADING RAMP
WARNING:
To avoid personal injury and/or property damage, please read and
follow ALL of these instructions before assembling and operating.
1. Never overload ramps. Maximum capacity for your ramp is 800 lbs per ramp; 1600
lbs per pair (all loads must be evenly distributed).
2. Always use safety strap to securely fasten the ramp to the vehicle. This prevents the
ramp from slipping off of the tailgate.
3. Carefully roll or winch equipment up or down the ramp. Never drive or ride your
equipment while loading or unloading.
4. Make sure the ramp is aligned with the wheels of the equipment being loaded or
unloaded.
5. Always load or unload on a solid, level and stable surface with the vehicle in park, the
parking/emergency brake on and the engine off.
6. Use as loading ramp only.
7. Ramp surfaces must be clean, dry and free from oil or grease or water.
8. Maximum recommended height is 30 inches.
9. Inspect ramp before each use. Tighten any loose hardware. Replace any worn or
damaged parts. Replace safety strap if webbing is frayed or worn. Do not attempt
to use a ramp that is damaged in any way. No modification, alteration or deviation to
the ramp are authorized by the manufacturer and shall not be made. Proper care and
maintenance of the ramp is essential to safety.
10. Proper use of this product is critical to safety and beyond the control of Erickson
Manufacturing Ltd. Erickson Manufacturing Ltd. neither guarantees nor is liable for
any damage resulting from improper use. The liability of this product is limited to its
purchase price if it proves to be defective in material and/or workmanship. Warranty
information is available upon request.
