Ergotron Anthro MiniCart GT23 Series, Инструкция по сборке

Страница: 1 / 4

300-068-00 rev. E
• 09/18
Anthro MiniCart
Assembly Instructions
01– Insert Screws ......................... Qty. 4 ................. 325-5052-00
02– 2 3 /
8
” Non-Locking Casters .... Qty. 2 ...............150-5002-03 *
03– Caster Inserts ....................... Qty. 4................525-1000-00 *
04– 2 3 /
8
” Locking Casters ............ Qty. 2 ...............150-5003-03 *
05– 1.75” Large End Caps ............ Qty. 2...................175-5021-xx
06– Base Tube Screws ....................... Qty. 3.................. 325-5000-00
07– MiniCart Base Tube ............... Qty. 1 ..................125-5004-xx
08– Self-threading Screws .............. Qty. 6.................. 325-5010-00
09– Vertical Legs ......................... Qty. 3..........................................
23.875” Vertical Legs (GT23xx)
.. .............................125-5020-xx
10– 1-5/8” Screws ............................... Qty. 6.................. 325-5086-00
11– Shelf Supports ............................ Qty. 6...................175-5060-xx
12– Shelf Clamps ................................ Qty. 6...................175-5059-xx
13– MiniCart Shelves ................... Qty. 2...................100-6003-xx
14– 1.5” Small End Caps ............... Qty. 3...................175-5020-xx
Enclosed Parts List
Detailed views of all hardware is provided with each
assembly step.
All fastener quantities listed here are the minimum needed for
your cart assembly. Your shipment may include a few extras.
Cable Management Components
Cable Alley, 9” .................. Qty 1 ....................................... 175-5061-03
Cable Alley, 3” .................. Qty 1 ....................................... 175-5062-03
Cord Handler ................... Qty 1 ....................................... 175-5001-03
Self-threading Screws .... Qty 6 ....................................... 325-5010-00
These Assembly Instructions are
for the GT23xx.
Before beginning assembly of your
Anthro MiniCart, please take a moment
to review the parts list below to verify
that your shipment is complete.
Does your Cart have 4” Casters?*
Then these are your casters:
4” Locking Caster
150-5011-03
4” Non-Locking Caster
150-5010-03
04
06
07
03
02
09
10
05
12
01
08
11
14
13
TOOLS
To make the assembly of your cart
even easier, we have included all of the
required tools . Use the handy Hex Driver
Bit in your electric drill in place of the Hex
Driver.
Hex Driver 5/32” .............. 375-5000-00
Hex Driver Bit 5/32” ........ 375-5003-00
8 oz. Rubber Mallet ......... 375-5022-00
Built with Anthro-DNA ™