Operating instruction
Hydraulic system with Motor drive PXD compact
Document no.: B-00021
Edition 2019 09
Operating instruction EN
Copyright by Ergoswiss AG
13/25
3.3.3
Manual control switch Up / Down Front
1.
Position the manual control switch at the desired loca-
tion underneath the table top.
The control panel must overhang below the work
surface!
2.
Fasten the manual control switch using the mounting
screws.
Be careful not to drill through the table top!
3.3.4
Manual control switch Up / Down Touch
1.
Position the manual control switch at the desired loca-
tion underneath the table top.
The control panel must overhang below the work
surface!
2.
Fasten the manual control switch using the mounting
screws.
Be careful not to drill through the table top!
