SanaBike 500 easy
Article-Nr.: 2.520132c
Revision: 10/2018
Page 19 of 21
The unit is resistant to jamming in an electromagnetic environment if the following prerequisites are met:
•
The voltage corresponds to the typical business or hospital environment in which the humidity should
be at least 30%, especially if the floors are synthetic.
If any disorders should occur nevertheless, especially in the vicinity of devices labelled with the symbol
"non-ionic electromagnetic radiation", check the recommended minimal distance according to the following
table. More information is given in the service manual.
Recommended safety distances between portable and mobile HF telecommunication devices and
the ergometer SanaBike 500.
The ergometer SanaBike 500 is designed for operation in an electromagnetic environment with controlled HF
disturbance. The customer or user can help avoid electromagnetic disturbances by keeping the minimum dis-
tance between portable and mobile HF telecommunication devices (senders) and the ergometer SanaBike
500, depending on the output performance of the communication device as indicated below.
Recommended minimal distance between the telecommunication devices and the ergometer.
Device/HF-Source
Standard
Rate
[MHz]
Rated power
Transmitter [W]
Distance
[m]
Baby phone
27-41
0.1
0.37
Walkie-talkie (rescue service, police, fire bri-
gade, service)
81-470
5
2.6
Mobile radio system (rescue services, police,
fire brigade)
81-470
100
11.7
Walkie-talkie
GMRS 460,
FRS 460
430-470
2
0.3
Mobile phone
LTE Band 13, 17
704-787
0.2
0.3
Mobile phone
GSM 800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
800-960
2
0.3
Cordless DECT telephone, WLAN, UMTS phone
GSM 1800,
CDMA 1900
GSM 1900
DECT;
LTE Band 1,3,4,25
UMTS
1700-1990
2
0.3
Bluetooth, WLAN systems (wireless mouse,
wireless keyboard, handsfree set)
802.11 b/g/n,
RFID 2450,
LTE Band 7
2400-2570
2
0.3
WLAN systems
802.11 a/n
5100-5800
0.2
0.3
Disposal
Devices that are no longer usable can be returned to ergosana for disposal. Alternatively, the device can be
taken to an approved disposal location.
•
The control unit of the device contains a buffer battery, which must be disposed of separately.
