ergoline ergoselect 4, Руководство оператора

Страница: 50 / 96

9 Control Terminal T
48 ergoselect 4 / 5
9.2.1 PC Mode
When the [ PC Mode ] key has been pressed, the screen
appears as shown at right. The ergometer is waiting for
commands from the external ECG unit.
As soon as the ergometer receives commands from the
controlling ECG unit or PC, the exercise test will start and
the corresponding values will be displayed.
The screen displays the status of the wireless connec-
tion (Bluetooth, WLAN), the heart rate (BPM), the blood
pressure values (mmHg), the oxygen saturation in percent
(%), the duration of the exercise test (min:ss), the pedal
speed (RPM), and the current load (W).
The exercise test can only be terminated with the corre-
sponding command from the controlling ECG unit.
A blood pressure measurement can be initiated with the
[ RR ] key. Pressing the [ RR ] key a second time during a
measurement will stop the measurement.
16
W
200
150
100
50
0
0 5 10 15 20 25
1/min
200
150
100
50
0
0
1/min
0
%
00:00
mm:ss
0
1/min
0
W mmHg
--/--
2 1 3 4 5 7
6
ECG
RR
Waiting for start
Saddle
Figure 9 – 9: PC mode screen
1
icon indicating wireless connection (Bluetooth or WLAN)
2
heart rate (BPM)
3 most recent BP value (systolic/diastolic) or cuff pressure
during inflation
4
oxygen saturation
5
duration of exercise test (min:ss)
6
pedal speed (RPM)
7 current load (watts)
ECG Mode
The display changes when the [ ECG ] key is pressed.
The acquired electrical signals will be displayed.
The amplitude (gain) can be adjusted with the arrow keys
[ ] and [ ].
The pump for the suction electrode system can be switched
on and off with the [ I / 0 ] key.
The vacuum intensity can be changed between low, medium
and high by touching the [ I / 0 ] key.
To switch off the pump, the displayed key [ low ], [ middle ]
or [ high ] must be pressed for about 3 seconds.
All inputs are confirmed with the [ ] key.
15 mm/mV
50 mm/s
0
1/min
0
%
00:00
mm:ss
0
1/min
0
W mmHg
--/--
ECG
Pump
Figure 9 – 10: ECG screen