ergoline ergoselect 4, Руководство оператора

Страница: 13 / 96

4 Setup and Mains Connection
ergoselect 4 / 5 11
4.2 Transport
For short distances, the ergometer can be lifted at the
saddle and rolled away on its castors.
To cover greater distances, however, we recommend the
following method:
• Disconnect the power cord and the connection cables.
• Rotate the handlebar towards the front and tighten the
clamping lever.
• Stand in front of the ergometer, grasp the handlebar
and tilt the ergometer towards you until it is standing
on the castors only and is balanced.
• It is now possible to transport the ergometer.
• When you have reached the new location, lower the
ergometer very carefully to protect it from considerable
damage.
Caution
Equipment Damage
Avoid strong vibrations of the ergometer during
transport.
Figure 4 – 3: Transporting the ergoselect
4.3 Setup
Place the ergometer on a horizontal level floor.
The ergometer must be set up in a secure and stable position;
the two leveling feet at the back make for easy adjustment
to uneven floors. An optional anti-tipping device is avail-
able to enhance the stability.
Extend the foot concerned until the ergometer no longer
wobbles.
In case of delicate flooring, it is recommended to place
a mat under the ergometer to protect the flooring from
damage by the feet.
Figure 4 – 4: Leveling feet of the ergometer