19
Fault:
Possible cause
Solution
The lift does not react
when the hand control
UP-button is used.
(a” beep” sound from the
Luna unit).
The lifting capacity has
been exceeded – User
too heavy or sling has
been caught on furniture
etc.
Charge batteries, if this does not
help the batteries must be
replaced.
Fault:
Possible cause
Solution
Does not charge.
Charger is not connected
to the main supply.
Connect charger to main supply.
(see section 2.6).
Charger defect.
Try another charger or get a new
one from the dealer or Winncare
Nordic.
Connection to the hand
control is defective.
Try another charger or get a new
one from the dealer or Winncare
Nordic.
6
TECHNICAL DATA AND DIMENSIONS
Technical specifications
Max capacity:
Length of lifting strap:
Weight:
Measurements:
Battery operation:
Charging:
Covering:
Noise:
IP-class:
Output:
200 kg or 275 kg (440 Ibs or 606 Ibs), depending on model
2200 mm (86.6 In)
6.7 kg (14.7 Ibs) without spreader bar
320 x 130 mm (12.6 x 5.1 In)
36 V lead acid batteries
100 - 240 V, 0.5 amp.
High impact, moulded ABS
LwA during lifting/lowering without load is 49dB(A)
LwA during lifting/lowering with 175 kg (386 Ibs) load is 53dB(A)
Cassette: IPx4
Charger: IPx4
Hand control: IPx4 / IPx7 (Depending on model)
24 V (Only available in the 2-channel model)
EMC tested according to following standards:
Luna
IPx4
200 kg (441 Ibs) 1 channel: IEC 60601-1-2:2014 (4
th
Ed)
Other models: IEC 60601-1-2:2007
Содержание LunaIPx4
Страница 2: ...2...