background image

80114-503

10.16

HYDROSURGERY

INSTALLATION INSTRUCTIONS

HybridKnife

®

 with the GI workstation

Operating steps

You need:

A gastroenterology workstation that is
ready for operation, and to which VIO and
ERBEJET 2 footswitches have been con-

nected.

A return electrode, including a return elec-
trode cable

A pump cartridge

A HybridKnife

Saline solution and infusion set, possibly
dye (e.g. indigo carmine)

1. Switch on the VIO.

2. Select a program (e.g. HybridKnife ESD).

3. Check the program settings of the Monop-

olar socket (for recommended VIO setting,

see overleaf).

4. Adopt the program settings. You can now

adjust the program settings as required.

1. Switch on the ERBEJET 2 unit.

2. Use the selection buttons 



 to select a

program (e.g. HybridKnife).

3. Confirm using the 

OK

 selection button.

4. You can now adjust the program settings

as required (for recommended ERBEJET 2
settings, see overleaf).

1. Wait until the ERBEJET 2 display shows

Please insert new cartridge!

.

2. Slide the pump cartridge into the pump

shaft. The pump cartridge must audibly
click into place.

1. To achieve an improved contrast, you can

add a dye to the sterile NaCl solution. A
low dose is sufficient.

2. Connect an infusion set to a sterile NaCl

solution.

The Installation Instructions do not replace training or the Notes on use. 
The Installation Instructions do not include any safety information. Familiarize yourself with the safety instructions in the Notes on
use. 

These instructions describe connection of the HybridKnife for use in the gastrointestinal tract.

!

1

Preparation

2

On the VIO

3

On the ERBEJET 2 unit

4

Inserting the pump cartridge into 

the ERBEJET 2 unit

5

Connecting the NaCl solution to 

the pump cartridge

Отзывы: