P700
Ceiling-Mounted PIR
Motion Sensor
Instruction Manual
The Sensor works based on detecting human body’s infrared
spectrum. When human moves within the scope, the Sensor
receives the signal and inputs it into microprocessor after
magnification. Microprocessor continues to sample infrared
signal and send wireless signal to wireless control panel after
calculating, thus to form a security system. The product can be
applied in banks, warehouses and homes etc.
Introduction
Features
Accurate Detection
360 detection, no dead angle
Automatic temperature compensation and anti-air turbulence
technology
False Alarm Prevention
Digital dual-core fuzzy logic infrared control processing
technology
Effectively identify interference signals from body movement
signals through intelligent analysis
Space-saving
Ceiling-mounted, not much space occupation
Integrated to home decoration, suitable for luxury premises
Energy-saving
Featured energy-saving mode enables 1 year standby
Product Overview
1
2
3
1. Test Button
2. Detection Lens
3. LED Indicator
4. Mounting Plate
AA LR6 1.5V
AA LR6 1.5V
Zone Setting
Infrared Sensor:
Detecting human body’s infrared spectrum.
Don’t touch the surface by hand and keep it clean.
PCB Layout
Infrared Sensor
LED ON/OFF
LED Indication
The LED indicator can be turned on or off by setting jumpers.
See “PCB Layout" above.
Detection Range
360°
3.6m
6m
Side View
Top View
Flash continuously:
Under self-testing state
Intruder is detected
Flash once:
Self-testing is finished, enters working mode
Flash twice:
Undervoltage indication, please
Flash once every 3 seconds:
change the batteries immediately.
Usage
Mode Setting
Remove the battery activation strip to activate batteries. It will
enter working state after one-minute's self-testing.
Testing mode:
Press test button, the Sensor enters testing
mode and detects once every 10 seconds. After 3 minutes,
the LED flashes twice, the sensor enters the power saving
mode.
In working state, if the Sensor is
Power-Saving Mode:
triggered twice within 3 minutes, it will enter sleeping mode
to save power. After no movement within next 3 minutes, the
Sensor goes back to the working state.