background image

THE

 ERA GT MK I and Mk II 

THE ULTIMATE IN HIGH PERFORMANCE

 

 

The

 

ORIGINAL FORD GT40* MK I

 

was built in 

both competition and road versions from 1966-1969.  
These remarkable cars won many races, including 
LeMans in 1968 and 1969.  Original GT40s are now 
collector’s items, worth well over 

one million dollars

The 

FORD GT40* MK II

 

came about when Ford 

stuffed the 427 NASCAR engine into the car, and 
made body modifications to compensate for the 
higher speeds and loads. 

ERA REPLICA AUTOMOBILES

 has long 

been known for the highest quality in design, 
engineering and craftsmanship.  In replica 

COBRA

 

circles, the

 E.R.A. 427SC has become THE 

STANDARD BY WHICH OTHERS ARE 
JUDGED.

  In sixteen of the last seventeen years, 

E.R.A. 427SC'S have won “

BEST COBRA 

REPLICA

” at the annual Shelby American Meet! 

 

THE LEGEND IS REBORN

 

NOW

E.R.A.

 offers affordable alternatives to the 

original GT40 MKI and MK II: Classic race cars 
carefully adapted to the street.   

THE ERA GT

 has been designed to standards far 

beyond what is expected for a composite automobile:  
The body, chassis, suspension and interior duplicate 
the original car closer than any other car selling for 
less than $250,000! 

But for us, racecar quality was 

not enough

!  Our body 

is much straighter than the original, with all-weather 
sealing.  And our chassis is designed as much for the 
street as the track.  Even air-conditioning is available. 

WE INVITE COMPARISON WITH ANY OTHER REPLICA, OR EVEN THE ORIGINAL GT40. 

*"FORD" AND "GT40" ARE REGISTERED TRADEMARKS.  E.R.A. IS IN NO WAY CONNECTED TO HOLDERS OF THESE OR 
ANY OTHER RIGHTS INVOLVING THE ORIGINAL FORD GT40.

  

Tel:

 (860)224-0253     

Fax:

 (860)827-1055     

E-Mail: [email protected]

 

Even more information can be found on the W.W.W. at 

erareplicas.com

 

 

 

Содержание GT MK I





























Отзывы: