Mains Powered External Siren
ERA Home Security Ltd
Valiant Way, Wolverhampton,
West Midlands, WV9 5GB.
Email: [email protected]
Model: WS280
1. INTRODUCTION
3. PRODUCT OVERVIEW
4. JUMPER SETUP
2. PCB LAYOUT
The External Mains Powered Siren will deter intruders by sounding
an alarm once it receives a wireless signal from a connected
Control Panel or Sensor. Multiple Sirens can be connected to the
same Control Panel to provide additional security. When the Siren
is connected to the Control Panel as an accessory, it will sound and
its LED lights will flash once the system is triggered. The Siren can
also be intalled as a standalone alarm system without the need for a
Control Panel, by connecting it to accessories like a Remote Control,
Door/Window Sensor or PIR Motion Sensor. When an accessory is
triggered it will sound and its LED lights flash.
Alarming Volume Setup
Please setup alarming volume and alarming duration time on the PCB board accordingly.
Note:
When the Siren is connected to the Control Panel, it will sound at the pre-set volume even if the Control Panel is set to mute.
This is to alert the neighbours and avoid any intrusion. If you select mute on the Siren, there is no need to select mute in the Control Panel.
Alarming Duration Setup
INSTALLATION
MANUAL
Status LED
Indicator
Mounting Holes
Back Cover
Tamper Switch
Bracket
Alarm LED
Indicator
Siren Interface
Learn Button
Battery Slot
Alarming Volume Setup
Alarming Duration Setup
Adapter Jack
Wired Sensor Terminals (Normal Zone)
Wired Sensor Terminals (24-H Zone)
DC 12V
Terminals
High
Mute
Low
High
Mute
Low
High
Mute
Low
5 Min
3 Min
30 Sec
5 Min
3 Min
30 Sec
5 Min
3 Min
30 Sec
Status
Front View
Back View
Status LED Indication
LED
Arm/Home Mode
Flash once
Disarm
No light indication
No disarm operation
after alarm
Flash once every 2
seconds for 2 hours
