LCD Alarm Clock – Indoor Temp.
MODEL 31038/31039
OPERATING MANUAL
Thank you for your purchase of this quality clock. The utmost care has gone into the design and
manufacture of our clock. Please read these instructions and store them in a safe place for future
reference.
To Install and Replace Batteries (the LCD clock uses 3 x “AA” batteries): To install and replace the
batteries, please follow the steps below.
1.
Remove the battery cover
2.
Insert batteries observing the correct polarity (see marking inside battery compartment)
3.
Replace the battery cover. Note: do not mix new and old batteries.
To Set the Time:
1.
Slide the LOCK SWITCH (5) to the T.SET (Time Set) position.
2.
Press the HOUR button (1) to advance the display to the correct hour.
3.
Press the MINUTE button (2) to advance the display to the correct minute. In 12 hours mode the
time will be displayed with an additional “PM” for the time from 12:00 noon until 11:59PM.
Slide the LOCK SWITCH (5) to the “LOCK” position once the time setting is complete.
To Set the Date/Calendar:
1.
Slide the LOCK SWITCH (5) to the DATE SET position
2.
Press the MONTH button (1), DATE button (2) or YEAR button (4) to advance the display to the
correct Date (Calendar).
3.
Slide the LOCK SWITCH (5) back to the LOCK position once the calendar setting is complete.