Equitrac PageCounter, Руководство по обслуживанию на месте

Страница: 19 / 126

Overview:
Terminal Modes Operational Modes
1 - 11
The Ready screen displays an accumulator for page count and a timer for device timeout.
The Ready screen can display page count and device timer as well as other configured
information such as billable/non-billable information or the total charge for the transaction.
The PageCounter returns to Idle mode when a user completes a transaction or after a
customer-specified period of keyboard inactivity in Data Entry mode or Ready Mode.
Operational Modes
A PageCounter’s operational mode determines the type of operation the PageCounter
controls. When a terminal is in Photocopy mode, for example, it controls access to the
connected copier and tracks copy transactions users perform on the copier. Both Mode 1
and Mode 2 support different operational modes.
Mode 1 Operational Modes
A PageCounter terminal using Mode 1 communication can support up to four operational
modes including:
• Photocopy mode—The terminal tracks copies made at a photocopier.
• Disbursements mode—The terminal tracks disbursements made at the terminal.
• Fax mode—The terminal tracks faxes made at either the terminal or the fax device.
• Job Code mode—The terminal records job codes used for fax transactions made at the
terminal.
• MyPrint mode—The terminal holds printed documents in a queue until an authorized
user releases or deletes them.
Note: The names and appearances of all operational modes are configurable and can differ
from terminal to terminal.
To switch from one operational mode to another on a PageCounter using Mode 1
communication, perform the following procedure:
1
Press the corresponding function key (
F1
,
F2
, or
F3
) for
MODE
on the screen.
2 Select the mode you want to use (copy, fax, and so on) by selecting the mode’s
corresponding number key.
3
Enter accounting data.
4 Perform your transaction using the controlled device.