Arm Set-up Manual
©
2011, Equipois Inc.
19 of 32
All rights reserved.
101-9110 Rev E
You can use parts you removed or parts from a conversion kit.
Note:
The kits differ in having either a long or a short shoulder mount with a match-
ing gas spring:
•
If you are installing a long shoulder mount (part number 101-6220-01), both
elbow and shoulder use a 1.5 x 20 lbs. gas spring (p/n 900-9016-GS).
•
If you are installing a short shoulder mount (p/n 101-6220-02), the elbow
uses a 1.5 x 20 lbs. gas spring (p/n 900-9016-GS) and the shoulder a uses 1.0
x 20 lbs. gas spring (p/n 900-9015-GS).
1.
Assemble these tools and materials:
_
6-inch C-clamp
_
-inch Allen wrench
_
-inch open-end or crescent wrench
_
Flat work surface
_
Mallet
_
Rag and isopropyl alcohol (IPA) or similar cleaning solvent
_
Grease
_
Removable thread glue, such as Loctite® Threadlocker Blue
32
3
8
3
