Cat. 6
A
German Faceplate Installing Instruction
1. Take out the cover. Loosen the M-shape cable holder and take it up.
2. Strip cable jacket approximate 30mm, and
separate the wires into 4 pairs.
3. Color-coding information for T568A and
T568B wiring.
T568A
T568B
Pin 1
White/Green
Pin 1
White/Orange
Pin 2
Green
Pin 2
Orange
Pin 3
White/Orange
Pin 3
White/Green
Pin 4
Blue
Pin 4
Blue
Pin 5
White/Blue
Pin 5
White/Blue
Pin 6
Orange
Pin 6
Green
Pin 7
White/Brown
Pin 7
White/Brown
Pin 8
Brown
Pin 8
Brown
4. Place the cable(s) underneath the M-shape
cable holder properly, make sure the foil or
braid shield contact with the cable holder,
and then fasten the screw. Follow the wiring
instruction to punch the wires by a punch
down tool
5. Adjust the gap on the cover to fit the
cables. Latch the snag (the marked part
in the following picture) to the hole on
the body and then fasten the screw.
6. Finish
