www.prolight.co.uk
Twin Shot MKII
User Manual
4
Installation
Installation:
Before installing the fixture, the supporting structure (ie. truss) must be able to hold a minimum of 10
times the fixtures weight without any deformation (eg. 15kg - 150kg point load). The fixture must be
secured with a secondary safety attachment when being installed (ie. an appropriate safety cable).
Never stand directly below the fixture when mounting, removing, and/or servicing.
Overhead installation requires experience and qualifications to calculate working load limits, the
material being used at the installation area and periodic safety inspections of the fixture and
installation material. If you do not have the relevant experience and/or qualifications please do not
attempt the installation yourself. The installation should be checked annually by a qualified person.
The Equinox Twin Shot can
be operated in a number of
mounting positions as shown
in the diagram to the right,
mounting sideways on truss
or stood upright on a flat level
surface.
DO NOT
hang the Twin Shot
upside-down from the ceiling or
truss. Always use a safety wire
as an extra safety precaution to
prevent damage/injury in the
event a clamp fails.
Never use the carry handles for
secondary attachments.
Do not orientate the output
nozzle directly in the direction
of the audience’s eyes. In order
to create the best effect, there
should be a distance between
the unit and the audience of at
least 5m.
This unit is constructed for a free standing or hanging installation. If the unit is to be installed overhead,
please follow the safety instructions below:
Rigging installation:
The installation has to be built and constructed in a way that it can hold 10 times the weight
of the unit(s) to be installed for 1 hour without any deformation.
The unit must always be secured with a secondary safety attachment, e.g. an appropriate catch net
or safety wire. The secondary safety attachment must be constructed in a way that no part of the
installed unit can fall down if the main attachment fails.
When rigging, derigging or servicing, do not allow personnel to be directly underneath the unit.
The operator must always make sure that the safety-relating and machine-technical installations are
approved by an expert before operation for the first time and after any further changes are made.
The operator has to make sure that the safety-relating and machine-technical installations
are approved by a qualified person once a year.
X
220-240V~50/60Hz
FUSE:
F3A 250V
DMX
OUTPUT
DMX
INPUT
POWER OUTPUT POWER INPUT
MKII
12V
CANNON
FEED
220-240V~50/60Hz
FUSE:
F3A 250V
DMX
OUTPUT
DMX
INPUT
POWER OUTPUT POWER INPUT
MKII
12V
CANNON
FEED
220-2
40V~50/60Hz
FU
SE:
F3A 250V
DM
X
OUTP
UT
DM
X
INP
UT
PO
WER OUTP
UT
PO
WER INP
UT
MK
II
1
2V
C
ANNON
FEED
220-2
40V~50/60Hz
FU
SE:
F3A 250V
DM
X
OUTP
UT
DM
X
INP
UT
PO
WER OUTP
UT
PO
WER INP
UT
MK
II
1
2V
C
ANNON FEED
