Equinox Systems ISP juno, Руководство пользователя

Страница: 48 / 60

ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20 47
Error 41 – Incorrect Target Signature or JTAG ID LCD Display message
This error corresponds to programmer error:
Error 41 – Incorrect Target Signature / Device ID
This error can be due to and of the following reasons:
•
For JTAG or SWD programming interface only.
•
The ‘signature (Device ID)’ or ‘JTAG ID’ read
back from the target IC / device does not match
the
‘signature’ and / or ‘JTAG ID’ declared in the
programming project.
6.10 Repeatedly executing the same project
If you are batch programming and simply want to execute the same ‘standalone programming
project’ over and over again, then you need to perform the following steps...
LCD Display message
Wait for the project to pass or fail
Press the 'YES' button
The ‘Project selection’ screen is displayed with shows the
‘currently selected’ project.
Press the key to select displayed project.
e.g. PROJECTNAME1
The programmer will then perform a ‘Project Image
check’.
This checks that the project data is valid (not corrupt).
Press the 'YES' button a third time.
The ‘currently selected’ project will then execute again.