Equinox Systems ISP juno, Руководство пользователя

Страница: 20 / 60

ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20 19
3.0 Powering the ISPjuno programmer
3.1 Overview
The ISPjuno programmer can be powered using one of the methods detailed in the table below.
# Powering method Section
1 External mains power adaptor via DC jack socket 3.3
2 External DC supply via DC jack socket 3.4
3 PC USB port power via programmer USB port 3.5
4 External USB 'Power bank' via programmer DC jack socket 3.6
5 Customer Target System / Target Supply 3.7
3.2 Programmer power connectors
The programmer can be powered from either the 'DC jack power connector' or the 'mini-USB port'
connector which are located on the bottom end panel of the programmer as shown in the illustration
below…
Bottom Panel
1. mini-USB Connector Port
2. DC Power Connector (Jack socket)
Connector Description Connector type Input voltage range
J10 USB Port mini-USB Connector
4.2 - 5.0V via PC USB port
or USB 'Power pack'
J12 DC power connector
2.1mm Jack Socket, centre
+ve
9.0 - 12.0V
Via mains power adaptor or
external power supply