Equinox Systems ISP juno, Руководство пользователя

Страница: 19 / 60

ISPJUNO - Portable ISP Programmer - User Guide V0.84 – 17/04/20 18
2.6 Programmer – Controlled Power Supplies
Programmer
Power Supplies
Value
Programmable Vcc
voltage (TVCC)
Yes
Only 4 x pre-defined voltage levels: 3.0V, 3.3V, 4.7V and 5.0V @ 250mA
Tolerance: +/- 5%
Programmable Vpp
Voltage (TVPP) No - fixed VPP voltage: 12.0V
@ 100mA
External Switched Vcc
supply
Not supported
Analogue voltage
measurement Yes
Target (TVCC)
Target current
measurement
Not supported
Target over-current
detection
Not supported
Target controlled
discharge circuit
Yes
2.7 Communication / Control Ports
The ISPjuno programmer features the following communications ports...
Communications ports ISPjuno
RS232 port 1
USB port 1
These ports can be found on the bottom end panel of the programmer....
Bottom Panel
1. RS232 Connector Port
2. mini-USB Connector Port
3. External DC Power Supply Input