Equinox Systems ESP-2 OPTO, Инструкция по установке и эксплуатации

Страница: 39 / 48

Equinox ESP-2 OPTO Serial Hub Installation and User Guide 35
6.6 Configurable Features Commands
Table 14 on page 19 describes each feature.
6.7 Initiating a Configuration File Download
When used from a BootP or SNMP server, no user interaction is required when a
configuration file is downloaded. Specify the configuration file as the “bootfile”
option on the server. (To use a DHCP server, the ESP-2 hub must have an infinite
lease on its assigned IP address.)
When using the web interface, follow the instructions in
Downloading a
Configuration File on page 19.
When using the configuration utility, follow the instructions in Downloading a
Configuration File on page 29.
6.8 Completion Status
To verify the completion status of a configuration file download:
If the web interface or the configuration utility was used to initiate the download of
the configuration file, the completion status of the operation will be displayed.
-or-
If the configuration file download was initiated from BootP, DHCP or a third party
SNMP agent, access the web interface (see
Accessing the Web Interface on page 15),
then select Configuration File Download from the Main Menu. Any errors will be
posted in the Status from last operation field. If the last operation completed
successfully, the field will be blank.
Table 20: Configurable Features Commands
Command Syntax Description
IPVIADHCP
ENABLE|DISABLE
Enables or disables acquiring the IP address using DHCP.
ADMINVIASNMP
ENABLE|DISABLE
Enables or disables administrative functions using SNMP.
WEBINTERFACE
ENABLE|DISABLE
Enables or disables use of the web interface.
CONFIGVIATELNET
ENABLE|DISABLE
Enables or disables use of the configuration utility.