Equinox Systems Equinox Console Manager CCM4850 CCM4850 CCM4850 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 100

background image

Chapter 3: Operations

29

NOTE:

The default community names are “public”; if you enable SNMP, you are encouraged to change the

community values to prevent access to the MIB.

SERVER SNMP COMMUNITY READCOMM=<

name

> WRITECOMM=<

name

>

TRAPCOMM=<

name

>

Although all three community names default to public, if you specify a trap community name with
this command, it must be different from the read and write community names.
For more information, see

Server SNMP Community command

To add or delete SNMP management entity addresses:

1. To add an SNMP management entity address, issue a Server SNMP Manager command with

the Add parameter and the management entity’s IP address. You may define up to four SNMP
management entity addresses, using separate commands.
SERVER SNMP MANAGER ADD <

ip_address

>

When you define at least one SNMP manager, SNMP requests are processed if they are from
one of the defined SNMP managers. If a request is not from one of the defined SNMP
managers, the SNMP request is discarded.

2. To delete an SNMP management entity address, issue a Server SNMP Manager command with

the Delete parameter and the management entity’s IP address.
SERVER SNMP MANAGER DELETE <

ip_address

>

If no management entities are defined, any SNMP manager may access the MIB. For more
information, see

Server SNMP Manager command

To enable or disable SNMP traps:

1. To enable SNMP traps, issue a Server SNMP Trap command with the Enable parameter.

SERVER SNMP TRAP ENABLE
The CCM appliance will display a numbered list of traps that are currently disabled with a
prompt requesting you to select trap(s) to enable. Indicate the traps to be enabled by entering a
trap’s list number, several numbers separated by commas, a range of numbers separated by a
dash or a combination of numbers with commas and dashes. To enable all traps, type

ALL

. To

cancel the command, press

Enter

.

- or -
To enable all SNMP traps, issue a Server SNMP Trap command with the Enable and All
parameters. In this case, the numbered list is not displayed.
SERVER SNMP TRAP ENABLE ALL

2. To disable SNMP traps, issue a Server SNMP Trap command with the Disable parameter.

SERVER SNMP TRAP DISABLE
The CCM appliance will display a numbered list of traps that are currently enabled with a
prompt requesting you to select trap(s) to disable. Indicate the traps to be disabled by entering
a trap’s list number, several numbers separated by commas, a range of numbers separated by a

«
...
39
40
41
42
43
...
»

Содержание Equinox Console Manager CCM4850 CCM4850 CCM4850





































































































Отзывы:

Нет отзывов

Похожие инструкции для Equinox Console Manager CCM4850 CCM4850 CCM4850

Бренд: JCG Страницы: 3

Module NI PXI-8250

Бренд: National Instruments Страницы: 39

Бренд: Dantel Страницы: 62

Бренд: Variscite Страницы: 18

Бренд: UfiSpace Страницы: 32

Бренд: National Instruments Страницы: 8

Бренд: Kaptia Страницы: 14

Бренд: JUMO Страницы: 60

Бренд: Avaya Страницы: 73

Бренд: SeaLevel Страницы: 21

NetVanta Analog Modem Dial Backup Interface Module

Бренд: ADTRAN Страницы: 2

Бренд: Wave Wireless Networking Страницы: 167

Бренд: Enterasys Страницы: 62

Total Access 1500 Dual FXS/DPO

Бренд: ADTRAN Страницы: 2

METERS AND MORE UM2241

Бренд: ST Страницы: 26

Бренд: Cutting Edge Страницы: 92

Бренд: Westermo Страницы: 22

Бренд: ActionTec Страницы: 87

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды