Equinox Systems EQLED201, Руководство пользователя, Страница: 11 / 16

www.prolight.co.uk Hallucination User Manual
11
CA 8 function:
The unit has a CA 8 remote control input on the rear. This may be used with the CA 8
hand controller (sold separately) to control the unit. Please see functions below.
Blackout
- By pressing the Stand By button the fixture will blackout.
Mode - Use this button to put the fixture into auto, show or motor speed modes.
Auto mode (Show 0) - LED off
Motor speed (1-9) - LED on
Show modes (Shows 1-8) - LED flashing
Function - Once you have chosen the mode you require use this button to set the motor speed
or show mode.
Motor speed (1-9)
Show modes (Shows 1-8)
Operating instructions
Fixture hours:
To access the fixtures usage time, press the “MENU” button and use the “UP” and “DOWN” buttons on
the rear of the unit to show
FHrS
on the LED display. Now press the “ENTER” button.
The unit will now display the fixtures usage time (hours).
To exit out of any of the above options, press the
“MENU” button.
Software version:
To access the fixtures software version, press the “MENU” button and use the “UP” and “DOWN” buttons
on the rear of the unit to show
VEr
on the LED display. Now press the “ENTER” button.
The unit will now display the fixtures software version.
To exit out of any of the above options, press the
“MENU” button.
Glass wheel/mirror dish rotation home position adjustment:
To access the offset menu for the gobo, colour, gobo rotation and mirror rotation home position
adjustment settings, press the
“MENU” button once and hold the “ENTER” button for 3 seconds
to display
GLAs
on the LED display. Now use the “UP” and “DOWN” buttons to choose between
GLas
(Glass wheel) or
rOta
(Mirror Rotation).
Press the “ENTER” button and use the “UP” and “DOWN” buttons to set the required gobo wheel
home position between
-127
~
127
. Press the “ENTER” button to confirm the setting.