Equinox Systems EQLED034, Руководство пользователя, Страница: 8 / 12

www.prolight.co.uk Quad Pix Batten User Manual
8
Auto mode:
To access auto mode, press the “MENU” button on the front of the unit to show
Auto
on the LED
display. The unit will now play through all the 16 built-in programs. To select the number of times
each program is repeated press the
“ENTER” button and use the “UP” and “DOWN” buttons to select
between
n001
~
n100
. Press the “ENTER” button then use the “UP” and “DOWN” buttons to select
the running speed
SP01
~
SPFL
. Finally press the “ENTER” button and use the “UP” and “DOWN”
buttons to select the flash speed
F500
~
F599
.
Press the
“ENTER”
button to confirm the setting.
Master/slave mode:
The default setting for this fixture is Master.
To set the slave unit, press the
“MENU” button on the front of the master unit to show
SLav
on the LED display. The unit is now in Slave mode.
To exit out of any of the above options, press the
“MENU” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the “MENU” button on the front of the unit to show
Soud
on the LED display. Now press the “ENTER” button to choose Sound mode 1 and use the “UP” and
“DOWN” buttons to choose the required sound sensitivity
S-.00
~
S-.31
. Press the “ENTER” button
again to choose Sound mode 2 and use the “UP” and “DOWN” buttons to choose the required sound
sensitivity
S-.00
~
S-.31
. Press the “ENTER” button again to choose Sound mode 3 and use the “UP”
and “DOWN” buttons to choose the required sound sensitivity
S_.00
~
S_.31
. Finally press
the “ENTER” button and use the “UP” and “DOWN” buttons to select the direction
{---
or
---}
.
Press the “ENTER” button to confirm the setting.
Value: 01 - 31 (01 = low sensitivity, 31 = high sensitivity)
To exit out of any of the above options, press the “MENU” button.
Operating instructions