www.prolight.co.uk
Fusion 150
User Manual
8
Slave mode:
To access slave mode press
“MODE”
until the display shows
SLnd
.
Press the
“ENTER”
button, the unit
should now display
SL 1.
Use the
“UP”
and
“DOWN”
buttons to select either
SL 1
or
SL 2
.
Press
the
“ENTER”
button again, this will enable your chosen slave mode.
To exit out of any of the above options, press the
“MODE”
button.
Adjusting the sound sensitivity:
To access the sound sensitivity menu press
“MODE”
until the display shows
SoUn
.
Press the
“ENTER”
button, the unit should now display the sensitivity in three digits
.
Use the
“UP”
and
“DOWN”
buttons to
select
001
through
100
.
Press the
“ENTER”
button again, this will set the sound sensitivity.
To exit out of any of the above options, press the
“MODE”
button.
Auto mode:
To access auto mode press
“MODE”
until the display shows
Auto
.
Press the
“ENTER”
button.
The unit will now display
At01
.
Use the
“UP”
and
“DOWN”
buttons to select either
At01
or
Sou1
.
Press the
“ENTER”
button again, this will enable your chosen auto mode.
To exit out of any of the above options, press the
“MODE”
button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Static colour mode (to use the fixture as an uplighter):
To access static colour mode press
“MODE”
until the display shows
Auto
.
Press the
“ENTER”
button
and use the
“UP”
and
“DOWN”
buttons to select either
Stat
.
Press the
“ENTER”
button again,
this will enable you to choose between
CL01-CL15
or
Fade.
When using the
Fade
function press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to select the desired fade speed between
SP01-SP31.
Press the
“ENTER”
button to confirm
the setting.
To exit out of any of the above options, press the
“MODE”
button.
Other settings:
Operating instructions
PAn
(X motor positive/negative move set)
YES/NO
tilt
(Y motor positive/invert move set)
YES/NO
Led
(digital display ON/OFF set)
ON/OFF
diSp
(digital display invert)
YES/NO
test
(function test)
HoUr
(total fixture run time)
rSEt
(reset)