www.prolight.co.uk
Fusion 150
User Manual
5
Operating instructions
DMX channel selection:
Operating in DMX control mode gives the user the greatest flexibility when it comes to customising or
creating a show. In this mode you will be able to control each individual trait of the fixture and each
fixture independently.
To access the DMX channel mode, press the
“MODE”
button on the font of the unit to show
CHnd
on the LED display. Now press the
“ENTER”
button and the channel mode will be displayed.
Use the
“UP”
and
“DOWN”
buttons to choose one of the 1, 4, 7, or 10 DMX channel modes. Press the
“ENTER”
button again, this will set the DMX channel. The display will now display
Addr
.
To exit out of any of the above options, press the
“MODE”
button.
1 channel mode:
Channel
Value
Function
1
0-7
Blackout
8-127
Auto run (AT01)
128-255 Sound active (128: low sensitivity, 255: high sensitivity)