Equinox Systems EQLA01, Руководство пользователя

Страница: 5 / 20

Operation modes:
Sound active mode:
To set the unit into sound active, set dip switch 10 to the “ON” position and all others to “OFF” .
The unit will now react to the beat of the music.
To set the sound sensitivity level, use sensitivity control on the rear of the unit.
Note: When there is no music present the laser will blackout.
Auto run mode:
To set the unit into auto run mode set dip switches 9 + 10 to the “ON” position and all others to
“OFF” . The unit will now scroll through its built-in programmes.
DMX mode:
To set the unit into DMX mode, set any of the dip switches 1-9 to the “ON” position to set the
desired DMX address. The unit will now run in DMX mode using your DMX controller.
Dip switch 10 must be set to the “OFF” position.
Please follow the DMX chart below for DMX functions.
DMX chart:
Equinox Pegasus 2 Laser Operations
Channel DMX number Function
1
2
3
0-49
50-99
100-149
150-199
200-255
0-255
0-255
0-255
0-255
0-255
0-255
Blackout
Pattern mode 1
Pattern mode 2
Sound active
Auto run
Pattern selection
Manually move the beams in/out
Manually move the beams up/down
Scanning speed (fast-slow)
Pattern speed (fast-slow
Pattern image size (small-big)
4
5
6
7