www.prolight.co.uk
Confetti Burst
User Manual
5
Operating instructions
Operating instructions
Installation:
Do not orientate the output nozzle directly in the direction of the audience’s eyes.
In order to create the best effect, there should be a distance between the unit and the audience
of at least 3m.
This unit is constructed for a free standing or hanging installation. If the unit is to be installed overhead,
please follow the safety instructions below:
Rigging installation:
The installation has to be built and constructed in a way that it can hold 10 times the weight
of the unit(s) to be installed for 1 hour without any deformation.
The unit must always be secured with a secondary safety attachment, e.g. an appropriate catch net
or safety wire. The secondary safety attachment must be constructed in a way that no part of the
installed unit can fall down if the main attachment fails.
When rigging, derigging or servicing, do not allow personnel to be directly underneath the unit.
The operator must always make sure that the safety-relating and machine-technical installations are
approved by an expert before operation for the first time and after any further changes are made.
The operator has to make sure that the safety-relating and machine-technical installations
are approved by a qualified person once a year.
Replacing the fuse:
Only replace the fuse with a fuse of same type and rating.
Before replacing the fuse, disconnect from the mains, see the following for procedure:
Step 1: Open the fuse holder on the rear panel with a suitable screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
(Replacement fuses should be of the same value as originally supplied)
Step 4: Replace the fuse holder in the housing.
Should you need any spare parts, only use genuine parts.
If defective, please dispose of the unusable unit in accordance with the current legal regulations.
Should you have any further questions, please contact your dealer.