www.prolight.co.uk
Confetti Burst
User Manual
4
Operating instructions
Button 1 – Channel 1
Button 2 – Channel 2
Button 3 – Channel 3
Button 4 – Channel 4
Wireless remote control operation:
To control the fixture via wireless remote control first set the channel on the control panel of the unit.
E.g. If channel 1 is set then to activate the unit press the 1 button on the RF remote. This function
allows multiple fixtures to be triggered at different times, controlled from one remote.
Ensure the handheld remote is fitted with a good quality battery (A23 12V Alkaline).
Press the correct button as per the list below to select the required mode of operation.
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of
the fixture and each fixture independently.
To access the DMX address, press the
“ENTER”
button and use the
“UP”
and
“DOWN”
buttons
to set the required DMX address. Press the
“ENTER”
button to confirm the setting.
Manual operation mode:
To access manual operation, press both the
“MENU”
and
“ENTER”
buttons together to activate.
Press both buttons again to deactivate.
Wireless remote control
Control panel