www.prolight.co.uk
Avalanche Snow Machine
User Manual
8
Operating instructions
DMX mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes to
customising, controlling or creating a show. DMX addressing is facilitated via the dipswitches on the top
of the unit.
Addressing
Each device occupies 1 channel. To ensure that the control signals are properly directed to each device
the fixture requires addressing. This needs to be changed for every fixture by changing the dipswitches
as set out in the table below. The starting address is defined as the first channel from which the
device will respond to the controller. Please make sure that you do not have any overlapping channels
in order to control each fixture correctly and independently from any other fixture on the DMX data link.
If two, three, or more devices are addressed similarly, they will work similarly.
Controlling
After having addressed all
devices, you may now start
operating these via your
controller.
Dipswitch number
1
2
3
4
5
6
7
8
9
DMX starting address
1
2
4
8
16
32
64 128 256
Occupation of the dipswitches:
Fixture 1 - Channel 1
ON
OFF
Fixture 4 - Channel 4
ON
OFF
Fixture 5 - Channel 5
ON
OFF
Fixture 2 - Channel 2
ON
OFF
Fixture 3 - Channel 3
ON
OFF
Channel Value
Function
CH1
000-255 Snow output
(0-100%)
1 channel mode