EQUIPMENT SAFETY SYSTEMS
75 Naxos Way, Keysborough 3173 Victoria Australia
P: +61 3 8770 6555 E: [email protected]
Skyjack SJIII DC Scissor
Plug and Play
Installation Manual
REV 1.2
07/10/2020
Model6253 OverWatch
™
Installation Manual
Document # DO001246
|
5 of 19
|
Installation Instructions
If any decals are damaged during the installation process or if any decals are obstructed following the installation,
they should be replaced accordingly.
Operator Sensor
Step
Description
Diagram
1.
Drill two 5.2mm holes to
mount the operator
sensor in the position
shown in the diagram.
2.
Mount the module in the
located position using the
supplied M4 nuts bolts
and washers.
The 7.5-degree angled
wedge blocks must be
positioned in the correct
orientation such that the
sensor is twisting
outwards from the
joystick. This is so that the
sensor can focus on the
centreline of the operator
in the normal standing
position.