QX1000 Manual II: Administrator's Guide
Administrator’s Menus
QX1000; (SW Version 5.3.x)
7
Administrator’s Menus
System Menu
Fig. II-1: System Menu in Dynamo theme
Fig. II-2: System Menu in Plain theme
System Configuration Wizard
The
System Configuration Wizard
allows the administrator to define the QX1000’s Local Area Network settings and to specify regional
configuration settings to make QX1000 operational in its LAN. The
System
Configuration Wizard MUST be run upon QX1000's first startup
to
make sure that it works properly in its network environment. The Wizard allows navigating through the following basic configuration parameters and
settings:
•
System Configuration
•
•
Regional Settings and Preferences (see below)
•
Emergency Codes and PSTN Access Codes Settings (see below)
DHCP Server Settings are described in the chapters below. The LAN
configuration and regional settings will be described later in this
chapter.
Please Note:
It is strongly recommended to leave the factory
default settings if their meanings are not fully clear to the
administrator.
Fig. II-3: System Configuration Wizard - Start page