QX1000 Manual II: Administrator's Guide
Appendix: System Default Values
QX1000; (SW Version 5.3.x)
149
Parameter
System Default Value
Management Access (Allowed for all),
No user defined services and IP pool groups.
DNS Settings
Nameserver-127.0.0.1
DHCP Server Settings
Disabled.
DHCP Advanced Settings
DHCP Options:
Gateways – 192.168.0.200
Subnet mask – 255.255.0.0
Domain name servers – 192.168.0.200
NBT name servers – 0.0.0.0
NTP servers – 192.168.0.200
Domain name – epygi-config.loc
Overload tftp server name – 192.168.0.200
DHCP Server Statements:
Authoritative – enabled.
Ping Check – enabled,
Ping timeout – 1 sec.
VLAN Settings
Undefined.
Extension Settings
Parameter
System Default Value
Voice Mail Settings
Maximal mail message duration - 5 min,
Ask password before granting local access to mail box – disabled,
Ask password before granting remote access to mail box – enabled,
Send welcome message – disabled,
Play Voice Mail help – enabled,
Automatically play messages - enabled,
Send mails count information message – disabled,
Send date/time information message – enabled,
Send beep at the end of message – enabled,
Silent VM recording – disabled,
Send new voice messages via e-mail – disabled,
Voice Mail–Send notification with attachment
Remove Voice Mail On Send-disabled
Fax– Send notification with attachment
Remove Fax On Send-disabled
Send new voice message notifications via SMS – disabled,
Send new voice message notifications via phone call – disabled,
Voice Mail Indication:
Lamp indication – enabled for IP lines only,
Tone indication – enabled for FXS lines only,
Ri
nging indication – disabled,
Zero Out – enabled, Redirect Call Type – PBX, Redirect Address - 00,
FAX Redirection – disabled,
Automatic Fax Receiving Mode – disabled,
Out of Office – disabled,
Forward/rewind duration – 3 seconds,
Greeting message – default,
VM Profiles – undefined.
Group List
No entries.
Speed Calling
No entries.
Account Settings
Display Name – undefined,
User Password Protection – disabled both for incoming and outgoing calls,
User’s Name for Extensions Directory – default,
Custom Voice Messages – default.
Caller ID Based Services
No entries in the table.
For Any Callers – all services are disabled,
Call Blocking message files – default,
