QX50/QX200/QX2000; (SW Version 6.0.x)
32
QX50/QX200/QX2000 Manual III: Extension User’s Guide
Caller ID Services
The
Caller ID Based Services
page provides options to configure a set of telephony settings from the same page. Call Forwarding, Incoming and Outgoing
Call Blocking, Hiding Caller Information, Call Hunting, Many Extension Ringing, Distinctive Ringing, Find Me/Follow Me, Intercom, Emergency Interrupt
and Voicemail Profile settings are configurable from this page.
Fig.III- 20: Caller ID Based Services for Any Address page
The
Caller ID Based Services
page contains a table listing all caller or called destinations and the ON/OFF status of the caller ID based services. The caller
or called destination numbers are used to configure caller ID based services based. The column headings in the table are designed as links. By clicking on a
column heading, the table will be sorted by the selected column. After sorting, (ascending or descending) arrows will be displayed next to the column
heading.
The table also has
Any Address
entry that is undeletable. It is used to configure caller ID based services for all addressed. When adding a new caller
address
Any Address
is changed to
Other Addresses
. Now there could be different configurations for the specified addresses and for all others.
Add
opens the
Caller ID Based Services
-
Add Entry
page where a new address and presence states can be defined.
This page consists of the following
components:
The
Description
text field requires optional information about the address owner.
Call Type
lists the available call types:
•
PBX
- local QX IP PBX extensions and Auto Attendant
•
SIP
– caller or called destinations reached through a SIP server
•
PSTN
– caller or called destination dialed from or to PSTN
•
Auto
– used for undefined call types. In this case, for incoming calls from specific address, configuration of caller ID based services will apply either
to PBX, SIP or PSTN callers. For outgoing calls, the called destination will be reached through Routing.
Address
requires a SIP address (see chapter
Entering SIP Addresses Correctly
), an extension or a PSTN number, for whom supplementary services should
be applied. If the address already exists in the table, selecting
Save
will give the error “Caller address already exists”. A wildcard is allowed in this field
Entering SIP Addresses Correctly
). Entering “*” as PBX or PSTN addresses will apply configuration of supplementary services to all extensions
or PSTN users.
The extension number should be inserted in the
Address
text field for the PBX call type. The PSTN number length depends on the area code and phone
number.
The
Presence State
radio buttons allows to set the Presence State of an extension.
•
All States
selection is used to select all states for an
extension.
•
Specific States
selection contains a group of radio buttons
that are used to select the state of the corresponding
extension:
o
Online
o
Offline
o
Busy
o
Away
o
DND
o
Meeting
o
Vacation
o
Lunch
Fig.III- 21: Caller ID Based Services – Add Entry page
