&
“Loading Paper in the Paper Cassette” on page 43
&
“Loading Paper in the Rear Paper Feed” on page 45
&
“Cleaning the Paper Path for Paper Feeding Problems” on page 129
Original Does Not Feed in the ADF
❏
Use originals supported by the ADF.
❏
Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
❏
Clean the inside of the ADF.
❏
Do not load above the line just under the
d
symbol inside the ADF edge guide.
❏
Check that the ADF icon appears on the control panel. If it does not appear, place the originals again.
Related Information
&
“Available Originals for the ADF” on page 48
&
“Placing Originals on the ADF” on page 48
&
“Cleaning the ADF” on page 130
Power and Control Panel Problems
Power Does Not Turn On
❏
Hold down the
P
button for a little longer.
❏
Make sure the power cord is securely plugged in.
Power Does Not Turn Off
Hold down the
P
button for a little longer. If you still cannot turn off the printer, unplug the power cord. To
prevent the print head from drying out, turn the printer back on and turn it off by pressing the
P
button.
LCD Screen Gets Dark
The printer is in sleep mode. Press any button on the control panel to return the LCD screen to its former state.
Printer Does Not Print
Check the following if the printer does not operate or prints nothing.
❏
When the user feature restriction is enabled, a user ID and password are required to print. If you do not know
the password, contact your printer administrator.
❏
For Mac OS X, the printer may not print when the user feature restriction is enabled. Contact your printer
administrator.
User's Guide
Solving Problems
161